Guide for Custom Classico Rack Measurements

Make your rack specific to your measurements

Calculate Your Custom Rack Size:

• Measure the space you wish to put the wine rack into, consider skirting boards.

• To convert your measurements to bottle spaces consult the chart. Take the nearest size under your measurement. For example if you have 1000mm the number of bottles would be 10 (974mm). These sizes apply to both the vertical and the horizontal dimensions of the racks. Allow room for a bottle to fit on top.

• Larger bottles 1.5ltr will fit on top, Magnum every second row.

• Multiply the vertical number by the horizontal number to give the total number of bottles.

• Email us with your rack requirements to get a quote including freight.

• With Larger racks, keep in mind, access to the installation area. Should that access be difficult we can make the rack in sections to facilitate installation.

• Where racks meet at right angles in corners allow 450mm clearance between the racks for removal of bottles.

• Corner Units can be placed at right angles allow 710mm from each side, these would be joined with the straight wall racks to view as one complete rack.

• The racks are 200mm in depth, single bottle rack. 500mm in depth double bottle and 300mm in depth for display bottle rack.

Number of Bottles Wide:

To Add Bottle / Add 93mm

137mm + 93mm = 230mm